1- Hari Chand Sharma Bierbeek 1997
Sitar Fret Instruções Subordinação
Sitar Fret Tying Instructions
Fig # 1: Cut a 4 foot (1.25 meter) long piece of fret tying string. Steady the fret in position, and place the right hand 3′ 6″ long tail into the slot on the near side end of the fret. Place it over the top of the loop in the left hand 6″ long tail. Place your left thumb on top of the loop to stop it slipping..
Fig # 2: Take the right hand tail under the neck, stretch it, and place it into the far side fret slot. Hold it in place with the middle finger of your left hand. Bring the tail back, stretch it, and place it into the near side fret slot.
Fig # 3: Take the right hand tail under the neck, stretch it, and place it into the far side fret slot. Bring the tail back, and and take it under the arch of the fret. (not in the slot)
Fig # 4: While holding all the strands under the thumb of your left hand, poke the right hand tail through the loop of the left hand tail.
Fig # 5: Pull up on the right hand tail, and down on the left hand tail. Feel the right hand tail click as it is tugged under the near side foot of the fret.
Fig # 6: Tie 4 half hitches. Apply a tiny spot of white glue on the knot. (Don’t get any glue on the sitar neck).
.© Brian Godden 1/1/1981 – 2008 e estão protegidos por copyright.http://www.perfectthird.com/Sitar%20Knots.htm
2- Calcutá Uluberia Sitar Makers.
3- Sitar Bridge fixing – tuning – start play
4- Making Sitar by Ravi Shankar Vol.1
5-Making Sitar By Ravi Shankar Vol.2
6- Engraving for sitar .MP4
7- Usuf Mirajkar_How sitar Made
8- Carving designs for Sitar (peacock).MP4
9- Sitar maker